REYN CONSULTANCY

REYN Consultancy · Brisbane · since 2009

Practical engineering for machinery and industrial equipment.

REYN develops purpose-built equipment from the operating requirement through design, analysis and manufacturing documentation, with practical support through fabrication and installation.

Discuss your project See the work
Large fibreglass truss being lifted into place by crane over a tank at a treatment plant
Fibreglass cover trusses: designed, analysed and detailed by REYN, then lifted into place on site.
Repeat work for Otis since 2013 Trade-trained fitter & machinist BEng (Hons) First Class, Mechatronics Brisbane · SEQ · remote nationally

From operating need to built equipment

CAD, FEA and drawings are tools. What clients engage REYN for is working out the equipment and resolving the problem, then seeing it through to manufacture.

Site photo

01

Operating need

What the equipment has to do, where it goes and what limits it. A sketch, photos or a site visit is enough.

Concept model

02

Concept

A 3D concept you can see, and a clear quote for the design work.

Analysis plot

03

Design, analysis & manufacturing information

Detailed design, FEA and a checked drawing pack. Independent engineer review arranged where required.

Installation on site

04

Support through the build

We work with laser cutters and fabricators, answer their questions and update drawings until it's made.

Clients include Otis Australia Silo Services Barker Trailers Alemlube Nextep MATO

Selected work

From design to built equipment

Each job below went from an operating need to a concept, through design and analysis, to manufacturing information and support while it was built.

Render of a self-climbing jump lift with work deck and protection deck inside a lift shaft
Design
Temporary steel deck and lifting chains inside a high-rise lift shaft during construction
On site

Otis Australia · high-rise construction

Temporary works that let a tower's lifts be built while it goes up

On tight city sites there's no room for outside hoists, so the lift shaft becomes part of the build. Since 2013 REYN has designed jump lifts, temporary motor rooms, lifting gantries and moving protection and work decks that installers use while the building rises.

Every one is different: the shaft, the machine and the climbing sequence decide the design.

The site rang one day and I thought something was wrong. The installer just wanted me to see my jump lift and temporary motor room working, 50 storeys up.
Daniel Reynolds, Principal Engineer

Silo Services · bulk handling

Getting pistachios into a silo without cracking them

The nuts had to be lifted to the top of a silo and lowered gently inside it. Auger flights can pinch and shear the shells, so we designed an inclined paddle conveyor to carry them up and a spiral chute to let them down slowly.

Designed for the product first, then for the workshop: laser-cut parts that locate themselves during fit-up.

Render of an inclined paddle conveyor feeding into the top of a steel silo
Design
Spiral chute installed inside an empty steel silo
Installed
Design drawing and photo of a fibreglass spiral staircase installed inside a water tower

Access in a confined space

A fibreglass spiral stair built inside a water tower

The stair had to follow a curved wall and go in through a small access opening. We designed it in light fibreglass modules, set out from fixed datums so it could follow the tower as built.

“Everything went to plan… we had the complete staircase installed in 2 weeks.”
Chris Andrews, Nextep

Barker Trailers · working at height

A mobile fall-arrest gantry for working on trailer decks

Workers on trailer decks needed an anchor point that could move with the job. We designed a free-standing gantry with a counterweighted base, a sliding jib and a winch, and checked it in FEA under both normal working and fall-arrest loads.

Bracket by bracket, the analysis drove the plate thicknesses and bolt patterns before anything was cut.

Render of a mobile fall-arrest gantry beside a low-loader trailer with a worker on the deck FEA stress plot of the fall-arrest gantry mast and jib under arrest load
Render of a temporary lift motor room with two lift machines
Temporary lift motor room
Render of a pump set mounted on a pontoon with handrails
Dewatering pump pontoon
Panorama of fibreglass trusses being installed over a circular tank
Fibreglass tank-cover trusses

More past projects →

Engineering analysis

Analysis that changes the design

Loads are modelled before anything is cut: structural FEA, deflection and factor-of-safety checks, and DEM for bulk material flow. Results go straight back into the design, and reports are set out ready for independent review.

FEA stress plot of a jump-lift frame under operating loads
Jump-lift frame under operating loads
FEA deflection plot of a temporary lift motor room chassis
Temporary motor room: deflection
FEA displacement plot of a lift-equipment transport trolley
Site trolley: checked before use on site
FEA stress plot of a fall-arrest traverse bracket
Fall-arrest bracket: detail stress

Second opinions

Got drawings or calculations from someone else that don't look right? We check them, find the problems and fix them before they reach the workshop.

What we do

Machinery and industrial equipment

Lifting & access equipment

Lifting beams and gantries, platforms, decks, ladders, davits and fall-arrest arms.

Handling & conveying

Conveyors, chutes, transfers and bulk handling, designed around the product.

Workshop parts & jigs

Brackets, fixtures and worn or obsolete parts, measured, modelled and made quickly.

Training rigs & mechatronics

Training equipment, sensors, controls and simple software added to mechanical designs.

FEA, DEM & design reviews

Analysis of new or existing equipment, and checks of drawings prepared by others.

Drawing packs & fabricator liaison

Checked manufacturing drawings, DXF for laser cutting, and support through the build.

About

An engineering consultancy since 2009

REYN Consultancy Pty Ltd designs equipment for construction, mining, agriculture, water and manufacturing clients across Australia. Many don't have their own engineering team: we become it for the job, working alongside their workshop, fabricators, laser cutters and independent certifying engineers.

REYN has operated from its own office in Toronto, NSW, with employed design and administration staff.

REYN is led by Daniel Reynolds, Founder & Principal Engineer. He started on the tools as an apprentice fitter and machinist in 2001 and holds a Bachelor of Engineering with First Class Honours in Mechatronics and Robotics, so designs are made knowing how parts are cut, welded, lifted and serviced.

“People see the finished job. They don't see the hours of checking behind it, because people's lives depend on what you've designed.”
REYN Consultancy office front with REYN signage in Toronto, NSW
REYN's office in Toronto, NSW

Company & credentials

  • Trading since 2009; REYN Consultancy Pty Ltd since 2012 (ABN 22 158 860 774)
  • Drawings to AS 1100
  • BEng (Hons) Mechatronic & Robotic Engineering, First Class, UniSQ
  • Trade certificate, fitter & machinist
  • Engineers Australia, Graduate member
  • SolidWorks, FEA, DEM, PDM
  • Independent engineer review and certification arranged where required

“Great work and always done in the time frame required, even when those time frames are what would normally be somewhat unrealistic.”

Boyd Johnston, Alemlube

Next chapter

REYN's own products

A construction drilling arm, starting with lift shafts. In development.

Follow progress →

Got something heavy, awkward or one-off?

Send a sketch, a few photos or just a description, and we'll come back with how we'd approach it.

daniel@reyn.com.au 0405 378 755

Springfield Lakes, Brisbane · SEQ · remote nationally